ShenZhen HongMing Magnetic industry Co.,LTD
Web site: www.szhmmag.com
Contact person: ms. Huang
Mail editor: 518103
Hand machine: +8613823610634
Machine: 0755-33888108
The true:0755-33523180
Q Q: 2300318916
Mail box: szhmmag@163.com
Address: Goldman Sachs No. 18, No. 18, Sha Jing Center Road, Baoan District, Shenzhen, Guangdong
CCAR33.15 regulation, applicability and durability of the materials used in the engine must comply with the approved specifications (such as industrial or military specification), ensure that these materials have design data of intensity and other performance. In the special engine of the two machines to realize domestic production, the material must be domestically produced.
Today, I will give you a list of the current standards of metal materials in our country, which will give a basic reference to the relevant practitioners, especially the airworthiness examiners. It is necessary to point out that our country has a lot of clutter and a great variety of reference standards in reference to material airworthiness. These criteria can be divided into the following categories:
- material aviation industry standards (HB)
- material aviation industry standard (MH)
- national military standard (GJB)
- national standard (GB)
- metallurgical industry standard (YB)
- aerospace industry standards (QJ)
- other criteria (CB, YS, YSJ, YC, WJ, etc.)
The above standards are briefly listed below (part) :
1. Aluminium nickel cobalt aviation industry standard (HB)
(1) metal materials:
High temperature alloys (listing a few)
HB 5163-1988K419 alloy ingot
HB 5198-1982 aero blade used deformed high-temperature alloy rod
HB 5199-1982 aviation use high temperature alloy cold rolled sheet
HB 5284-1984 alloy hot rolled rod technical conditions for aviation
HB 5285-1984 alloy plate forging with a GH698 alloy
HB 5330-1985 aviation K9 alloy ingot
HB 5331-1985 aluminium-nickel cobalt aviation using K17G nickel base casting high temperature alloy technology
Steel iron (list a few)
HB 5252-1983 aviation use 40CrMnSiMoVA ultra high strength steel bar
HB 5253 -- 1983, the aviation USES 40CrMnSiMoVA no hair - grained steel pipe
HB 5269-1983 aviation use advanced quality structural steel rod
HB 5298-1985 air - free spring steel wire
HB 5424-1989 stainless steel alloy casting ingot
HB 5430-1989 stainless steel heat resistant steel casting
HB 5451-1990 stainless steel heat resistant steel casting compressor static
Aluminum, magnesium alloy aluminum nickel cobalt (listing a small number)
HB 962-1986 casting aluminum alloy
HB 963-1990 aluminum alloy castings
HB 964-1982 casting magnesium alloy technical standard
HB 965-1982 magnesium alloy casting technical standard
Titanium and titanium alloys
HB 5223-1982 aero engine plate with TC4 titanium alloy die forging
HB 5224-1982 aero - engine cake billet used TC4 titanium alloy die forging
HB 5262-1983tc11 titanium alloy compressor disc (ring) bar technical standard
HB 5263-1995TC11 titanium alloy compressor plate die forging parts ML
HB 5264-1983TC11 titanium alloy compressor disc and its bread and slab gold standard
It is an aluminum and cobalt precision alloy, copper alloy and precious metal
HB 5018-1997 cast aluminium nickel - cobalt permanent magnet alloy HB
HB 5170-1981 electrocontact with precious metal and its alloy wire forging test method
HB 5171-1981 copper and precious metal oxide metallographic test standard
6. Powder metallurgy and coating
HB 5341-1986b-1000 high temperature ceramic coating standard
HB 5366-1986 aviation USES carbon graphite sealant
HB 5367.1-1986 carbon graphite sealing material compressive strength test method
HB 5367.2-1986 carbon graphite sealing material anti-folding strength test method
The physical metallurgy and surface strengthening of the system
HB 6742-1993 monocrystalline leaf crystal orientation of the determination of X - ray backfiring Laue photography
HB/Z 26-1992 air parts spray reinforcement process general specification
HB/Z 170-1990 aerospace metal parts extrusion and reinforcement process general instructions WX
(2) special technology of metal materials
1) forging made
HB 5119-1979 forging term
HB 5355-1994 forging process quality control
HB 5402-1997 forgings test setting specification
HB 7065-1994 specification of glass protective lubricant for thermal deformation of metal materials
(2) cast made
HB 5117-1978 forging terminology
HB 5343-1994 forging process quality control
HB 5344-1986 melt casting with polymerized rosin
HB 5345-1986 melt mold casting with ethyl silicate
(3) welding joint
HB 458-1984 aviation industry use electrode quality inspection
Technical conditions of HB 459.1-1984HTJ1 welding rod
Technical conditions of HB 459.2-1984HTJ2 welding rod
(4) heat treatment
HB 5013-1996 heat treatment parts inspection category
HB 5022-1994 air steel parts nitrification and nitrogen carburization inspection standard
HB 5023-1994 air steel parts nitride and nitrogen carburizing layer solubility determination method
Surface treatment
The selection principle and thickness series of HB 5033-1977 coating and chemical cover
HB 5034-1995 zero (group) pre-coated quality requirements
Protective packaging
HB 5028-1995 airborne equipment dry air mothballed HB 5129-1979 aero-engine dry air mothballed
HB 5200-1982 test method for moisture permeability of packaging materials
(3) metal material testing method
Chemical composition analysis
HB 5218.1-1995 aluminum alloy chemical analysis method BCD spectrophotometry determination of copper content?
HB 5218.2-1995 method for the determination of copper content by iodine quantity method
Mechanical property
HB 5142-1996 metal material plane strain fracture toughness KIC test method
HB 5143-1996 metal temperature tensile test method
HB 5144-1996 metal temperature impact toughness test method
Nondestructive testing
HB 5131-1979 structural steel precision casting internal loose X-ray classification standard
HB 5169-1981 platinum-25 alloy sheet ultrasonic flaw detection method
HB 5265-1983 aviation engine TC11 titanium alloy compressor disk and cake (ring) billet ultrasonic inspection instructions
(4) corrosion erosion
HB 5194-1981 cycle infiltration corrosion test method
HB 5225-1982 metal corrosion and protection common noun terminology
HB 5254-1983 tensile stress corrosion test method for deformation of aluminum alloy
(4) non-metallic materials, processes and tests
Transparent material
HB 5186-1981 aircraft seat cover soft fixed with acrylic adhesive technology? Conditions?
HB 5268-1983 organic glass plate fracture toughness test method
(2) the coating material
HB 5453-1990 aluminum alloy chemical milling protection coatings
HB 6733-1993 aircraft parts and machine painting process quality control
HB 6768-1993 carbon fiber composite material aircraft covered with antistatic polyurethane enamel
(3) rubber adhesive
HB 5229-1983 the aviation USES low compression permanently deformed fluoro rubber
HB 5230-1983 the quality standard of fluoro rubber o-ring seal with low compression and permanent deformation
(4) sealant
HB 5241-1993 test method for the active phase of the sealant for room temperature (consistency method)
HB 5242-1993 non-stick phase test method for room temperature vulcanization sealants
Adhesive and adhesive tape
HB 5313-1993 aero - aerosol sealing test method
HB 5314-1993 method for the test of anaerobic adhesive static shear strength
Composite material
HB 5011-1994 low-pressure molding glass fiber reinforced plastic aviation components
HB 5296-1984sc-13 glass cloth laminated parts with adhesive
HB 5342-1995 composite material aviation manufacturing process quality control
Oil and lubricating materials
5221-1982 - HB 60 ℃ ~ 180 ℃ in light load aviation grease
HB 6688-1992 heat curing molybdenum disulfide dry film lubricant
Engineering plastics
HB 5393-1987 long glass fiber reinforced polyamide 1010 plastic
HB 5394-1987 polyamide 1010 resin
Test methods for non-metallic materials
HB 5164-1981 metal adhesive tensile shear strength test method
HB 5390-1987 laser holographic determination of non - metallic structural material poisson test method
(5) comprehensive management standards
HB 5299-1996 aviation industry manual welding welding technology assessment
HB 5357-1997 certification and certification for non-destructive testing personnel
HB 5405-1988 metal plating and chemical coating process for workers' technical assessment standards
HB 5459-1999 aviation analysis chemical detection personnel qualification
HB 6129-1987 aircraft lightning protection requirements and test methods
HB 6141-1997 basic rules for the preparation and publication of aviation industry standards
HB 6724-1993 production process management
HB 6725-1993 production operation plan management
HB 6726-1993 production scheduling work management
HB 6727-1993 in product management
HB 6728-1993 warehouse management in the production process
HB 6729-1993 production site management
HB 6730-1993 aviation product trial production management
HB 7039-1994 manufacturing management outline
HB 7040-1994 aviation industry metal material code
HB 7041-1994 non-metallic code for the aviation industry
HB 7086-1994 civil aircraft pneumatic peripheral tolerance
HB 7129-1994 product quality record management
HB 7475-1996 non-metal performance testing personnel qualification
HB 7476-1996 metal mechanical performance testing personnel qualification
HB 7477-1996 qualification of aviation physical metallurgy testers
HB 7478-1996 aviation equipment failure analysis metallurgical personnel qualification certification
HB/Z 157-1990 supplier recognition specification for metal material supplier
HB/Z 165-1990 civil aircraft manufacturing process recognition specification
HB/Z 166-1990 production process of metal materials for civil aircraft
HB/Z 188-1991 civil aircraft can choose material standard catalogue
HB/Z 204-1991 aircraft used metal for acceptance control procedures
HB/Z 219-1992 aircraft use non-metallic materials into the plant acceptance control procedures
HB/Z 271-1995 quality planning guidelines
HB/Z 277-1995 civil aircraft cabin material fire planning guidelines
Guidelines for quality system documentation review in HB/Z 279-1995
HB/Z 308-1997 new material test outline and approval procedure for civil aircraft
2. Aviation industry standard (MH)
MH/T 6040-2006 air material smoke density test method
MH/T 6041-2006 proof of heat insulation materials
MH/T 6042-2006 thermal insulation material combustion and flame spread characteristic test method
MH/T 3001-1995 aircraft non-destructive testing personnel technical qualification identification rules
MH/T 3001-2004 aircraft nondestructive testing personnel qualification and certification
3. National military standard (GJB)
GJB 2053-1994 aluminium alloy sheet specification for aerospace
GJB 2054-1994 aluminum alloy rod specification for aerospace
GJB 2055-1994 aluminum and aluminum alloy riveting wire specification
GJB 2056-1994 aluminum alloy phase variable section profile specification
GJB 2057-1994 alloy forgings of LY19
GJB 2351-1995 specification for aluminum alloy forgings for aerospace
GJB 2662-1996 aluminum alloy plate specification for aerospace
GJB 2663-1996 aluminum alloy profile specification
GJB 5074-2001 aircraft used aluminum alloy monolithic panel profile specification
GJB 5075-2001 aviation aluminum alloy foil specification
4. National standard (GB)
Microstructure test of GBT 14999.4-94 high temperature alloy
GBT 14999.3-94 high temperature alloy bar longitudinal fracture test method
GBT 4338-2006 metal material high temperature tensile test method
GBT 13239-2006 metal material low temperature tensile test method
GB/T 774-2004 composite steel plate ultrasonic inspection method
Chemical analysis method of aluminium and aluminium alloys
GBT 19822-2005 aluminum and aluminum alloy hard anodized film specification
GBT 3190-2008 aluminum and aluminum alloy chemical composition
GBT 2039-1997 metal tensile creep and endurance test method
GB/T 3620.1-2007 titanium and titanium alloy plate number and chemical composition
Gb-t 3190-1996 aluminum and aluminum alloy chemical components
GB - T 16474-1996 aluminum and aluminium alloy plate number representation method
Astm-e 399-90 metal material fracture toughness K1c test method
GBT 13329-2006 metal material tensile test method
Metal materials standard manual (upper, lower)
GBT 228-2002_ metal material _ room temperature tensile test method
Metallurgical industry standard (YB)
YB/T 036.6-1992 metallurgical equipment manufacturing general technical conditions. Aluminum alloy castings
YB/T 065-2008 silicon aluminum alloy
YB/T 066-2008 barium aluminum alloy
YB/T
Recommend information
- 2017-07-07How to make your magnetic separator long
- 2017-07-07The permanent magnet material is the fir
- 2017-07-07Magnetic therapeutic effect of ndfeb str
- 2017-07-07Magnets in aviation
- 2017-07-07How to judge the quality of sintered ndf
- 2017-07-07Let's touch the magnet! - introducti
- 2017-07-07Domestic metal material standard catalog
- 2017-07-07Introduction, analysis and application o
- 2017-07-07Magnetic therapeutic effect of ndfeb str
- 2017-07-07What is the best coating on the surface